Why Asus Stuck On Restarting Screen Problem?
- Posted by Eve Vincent
- On May 22, 2019
- 0
Asus stuck on restarting screen is the most frequent issue of all the Windows 10 users where their Asus system gets disrupted while restarting, for a specific span of time. The rotating ball signifying processing and the restarting process is observed on the system’s window for as long as four minutes to five minutes. Moreover, you may encounter this frustrating issue on the Windows 10 system due to several possible reasons.
However, if you are experiencing the same with your Asus system, then don’t be tensed. Here, we have provided a list of effective troubleshooting methods. Go through the below-stated methods to fix this issue in no time.
Get to know Technical Hacks to Fix the Asus Stuck on Restarting Screen Issue
There are plenty of ways through which this Asus stuck on restarting screen problem can be resolved. But, you need to try some effective methods which can ensure the premium solution on time. Here, we are going to discuss some of the most effective and easy troubleshooting ways which can effectively eradicate this frustrating issue of Asus. Therefore, simply work your way down until you find the best fixing method regarding this issue.
Way 1: Disabling the First Startup
This feature of the Windows 10 Operating System is the combination of the two elements. One is the ‘cold shut down’ feature and the second one is the ‘hibernating’ feature. In order to fix this issue, at first you need to disable the first startup of your Windows 10 system. Follow the below-stated instructions to disable the first startup option.
- At first, you need to press and hold down the Windows key and at the same time press down the R key on the keyboard to open the Run box.
- Now, you will get the Run box.
- Afterward, type the ‘Control Panel’ in the Run box. After that, tap on the Enter key on the keyboard.
- This process will launch the Control Panel of the Windows 10 system.
- Now, you need to tap on the Power option under the Control Panel.
- After that, tap on the ‘Choose what the power buttons do’ option under the Power options, which is at the left corner of the window.
- Now, you will get an option which needs administrative privileges permission ‘Change Settings that are currently unavailable. Now, tap on this option.
- You need to go to the bottom of the screen and untick the checkbox, which is named as ‘Turn on fast bootup’. After that, tap on the Save option to save the changes that you have made.
- Once the above steps are done, close the window.
- After that, you need to Restart the system. Check the system to see that the issue is resolved or not.
Way 2: Disabling Cryptographic, Geolocation and Selective Startup of the System
A maximum number of Windows 10 users reported that canceling the cryptographic and geographic services of their system made their problem go away. Basically, these services help the system to track itself with the help of the geographic coordinates. To disable the Cryptographic, Geolocation and Selective Startup of the system, follow below-described steps.
- At first, you need to press and hold down the Windows key and at the same time press down the R key on the keyboard to navigate to the Run box.
- Now, you will get the Run box.
- Afterward, write ‘msconfig’ in the Run box. After that, tap on the Enter key on the keyboard.
- Now, you need to navigate to the General tab option. After that, choose the Diagnostic Startup option, under the General tab.
- Now, you need to tap on the Apply button to save the changes that you have made.
- Afterward, close the window.
Disable the Cryptographic Services:
To disable the Cryptographic services, go through the following steps.
- Now, you need to press and hold down the Windows key and at the same time press down the R key on the keyboard to open the Run box.
- Now, you will get the Run box.
- Afterward, write ‘services.msc’ in the Run box. After that, hit the Enter key on the keyboard.
- Now, you need to browse through the menu until you find the ‘Cryptographic Services’. Click (Double) on the ‘Cryptographic Services’ to open the menu of the services.
- Afterward, you need to navigate to the General tab option. Tap on the ‘Stop’ option which is under the subheading of the Service status.
- Once you click on the Stop option, after that, tap on the ‘Startup Type’ and choose the ‘Disabled’ option under the list of the drop-down menu.
- Now, you need to hit the OK button to save the changes that you have made. Once you are done, close the window.
Disable the Geolocation Services:
- Afterward, you need to browse through the menu until you find the ‘Geolocation Services’. Click (Double) on the ‘Geolocation Services’ to open the menu of the services.
- Afterward, you need to navigate to the General tab option. Tap on the ‘Stop’ option which is under the subheading of the Service status.
- Once you click on the Stop option, after that, tap on the ‘Startup Type’ and choose the ‘Disabled’ option under the list of the drop-down menu.
- Whenever you complete all the above steps restart the system. After that, you need to check the system, if the issue gets resolved.
- In case, the issue persists, try to change the Startup Type of the system to the Normal Startup option.
- After that, again restart the system.
Way 3: Upgrading the BIOS of the System
Basically, BIOS stands for Basic Input/Output System. Moreover, the BIOS is a firmware which is used to execute the hardware initialization while booting the system. The Basic Input/Output System is also responsible to test the hardware peripherals and you need to make sure that they are running properly without any technical flaws.
Therefore, you need to upgrade the BIOS to avert such technical issues. Most of the Basic Input/Output System (BIOS) is specially designed to work with a particular and specific motherboard or computer model. Moreover, there was concrete feedback from the Windows 10 users that upgrading their BIOS resolved the technical flaw of their system being stuck at the restart window.
Way 4: Upgrade the Drivers of the System
Incompatible and backdated drivers also often cause this issue on Windows 10 system. The drivers may not be configured correctly or installed correctly on your Asus system after upgrading the Operating System of your computer. Moreover, by upgrading the drivers, you can easily resolve this issue effectively.
- At first, you can try to update the drivers automatically with the help of the Windows Update.
- After that, if you still do not get the proper driver of the system, then you can install the drivers by following the below-stated manual steps.
- At first, press and hold down the Windows key and at the same time press down the R key on the keyboard to go to the Run box.
- Now, you will get the Run box.
- Afterward, write ‘devmgmt.msc’ in the Run box. After that, hit the Enter key.
- This process will launch the Device Manager.
- Now, you need to navigate through all the devices on the system and choose the ‘Graphics/Display Drivers’ to upgrade the driver. You must check the updates of all the drivers associated with the system.
- After that, tap on the Display Adapter drop-down list to check the list of the installed display cards. You need to click on that. Choose the ‘Update Driver’ option.
- Now, you will get a pop-up dialog box which is asking you which way do want to upgrade the driver. Choose the first option from the list. Tap on the ‘Search automatically for updated driver software’ option and proceed.
- Now, you need to upgrade all the drivers of the system.
- Restart the system and check if the issue got resolved.
Way 5: Delete the Contents of the SoftwareDistribution
There is a high chance that there are some corrupt files and folders in the system which interferes while restarting. To fix the corrupted files and folders, you need to delete the contents of the Software Distribution. However, to do so, go through the below passage in detail.
- At first, you need to press and hold down the Windows key and at the same time press down the S key on the keyboard to navigate to the Search bar of the Start menu.
- Now, you will get a Search box. Write the’ Command Prompt’ in the Search box. After that, choose the ‘Run as Administrator’ option.
- Now, you need to write ‘net stop wuauserv’ and tap on the Enter key on the keyboard. This command will definitely stop the upgrade procedures which is running in the background.
- After that, you need to write the ‘cd %systemroot%’ in the ‘Run as an Administrator’ search box. Now, this command will definitely navigate the Command Prompt to install the directory associated with Windows 10 OS.
- Now, you need to write ‘ren softwaredistribution SD.OLD’ in the ‘Run as an Administrator’ search box. By entering this command, the system will not obtain the folder of the SoftwareDistribution and will be bound to make the latest one.
- At last, you need to write ‘net start wuauserv’ and tap on the Enter key on the keyboard. This command will allow the upgrade services of the system back on.
- Once the above steps are complete, you need to restart your device and check if this method yielded any solution.
Wrapping it Up
In this post, we have already discussed the easiest and practical solutions, which will ease the situation and make things work for you. Moreover, this article covers the effective guidelines regarding the Asus stuck on restarting screen issue. Apply the above-described ways and make a difference in your present situation. If you need to read about related topics, then refer to our upcoming posts.
0 comments on Why Asus Stuck On Restarting Screen Problem?