- Posted by Eve Vincent
- On December 15, 2017
The Error Code FF in Asus Motherboard means that fault found and could be many things. To Fix Asus Motherboard Error Code FF is not such a tricky task for users if they know about electronic products like hardware and software configuration on Asus Laptop. Well, many numbers of user’s complaint to getting this Error Code FF, while operating the Asus Laptop. So, if you are facing the same error, then you don’t need to worry about it. Well, here the blog will explain you simple steps to Fix Asus Motherboard Error Code FF. So just applying simple steps, you can get this trouble in an efficient manner.
Steps to Fix Asus Motherboard Error Code FF:-
Step 1:- Check What Burnt Electronics Are Indicating You
Do you know about electronics products and have well-observation power such as smell like, then smell your motherboard. Specifically around the VREG (left/above the socket), Southbridge (below the socket) and Chipset (right of the PCI slots) areas. If you smell burnt electronics, keep that in mind if you hit step (7b) below as mentioned. Means, the motherboard 99.9% of the time.
Step 2:- Test the PSU with a Tester
- You should try to test the PSU with a tester, if it’s not beeping/blinking at you then its ok.
- You need to unplug and re-plug the 24-pin connection several times.
- Keep an eye on the “PG” and see if it ever reports 0ms or 999ms as this means it’s a bad PSU (since this is unloaded it won’t fail the PSU tester every time even though it will fail the motherboard every time). If you don’t have PSU tester, swap in your known-good PSU.
Step 3:- Plug the Power into the Motherboard
With the PSU verified to be good, plug in ONLY the power to the motherboard (20+4-pin and 4/8-pin CPU power, but NOT the 4-pin molex connection if it has one). Disconnect EVERYTHING else from power (such as Hard drives, DVD drives, etc.).
Step 4:- Power Switch Connected
- Remove all RAM, then remove all GPUs, and then remove all other PCI/PCI-e cards.
- Unplug all the cables (including SATA, IDE, FDD, SAS, USB, Firewire, HD Audio, and all the switches but the power switch) from the motherboard.
- You should have just your MoBo, CPU, HSF, PSU and a power switch connected right now. Disconnect EVERYTHING from the front and back panels of the computer, including your mouse and keyboard.
- In case, if your computer does NOTHING when you hit the power button, plug the reset switch into the power switch pins on the motherboard and use the reset button in case the power button has gone bad- yes, it happens, no it won’t damage anything.
Step 5:- Remove the BIOS Battery
Remove the BIOS battery and leave it out until that you are told to put it back in.
Step 6:- Power on the Computer
Power on the computer. If it beeps or gives a POST code other than FF then go to (7a) below, if not check out (7b).
Step 7:- Gives any POST
A) Verify Its Giving POST Code FF
Then you need to verify that, if it’s beeps at you, or gives any POST code other than FF then turn it back off. Leave the BIOS battery out. You will now add in 1 piece of hardware, power it on, check if it POSTs (and gives any error other than FF), if it does, turn it back off and add the next component. Start with RAM, one stick at a time, then GPUs, one at a time, then other expansion cards, finally HDDs/DVD drives – rebooting between each and every parts.
B) Verify It’s Giving Any POST Code FF
If it still POSTs as FF or not at all in this condition remove the CPU, make sure the pins are intact, reseat the CPU and HSF and try it again. If it still posts FF you either have a bad motherboard or a bad CPU.
Step 8:- Confirm Its Bad or Not
If it starts giving an FF code or stops Posting all together then the last component you added is bad. If it doesn’t give an FF error code and is still Posting with all your hardware back in, shut it down again, put the BIOS battery back in and power back on one more time. If it gives an FF code now, replace your BIOS battery.
Step 9:- Check Your Motherboard
If it works with everything back in, then your motherboard lives to fight another day.
Swap in a known working motherboard if you have one to test the CPU is good, or bring in a spare CPU to test the motherboard with. Whichever part fails is the culprit, replace it and go again.
Follow the steps, and try to resolve your issue to Fix Asus Motherboard Error Code FF, as you see it can mean a number of things, and steps.
In case, after performing all the procedure or step, still the error exists, then you should contact with highly skilled technicians at Asus Customer Service Number to take instant online help to Fix Asus Motherboard Error Code FF.
Related Post: How to Fix Asus Error Code A0?
Dial Asus Customer Support Number +1-855-260-8470 to Reach With Professionals:-
Contact at Asus Customer Care Number, which is a toll-free and available 24×7 day to support. The certified technicians are available round the clock, and will help you in fixing your Asus technical issues with the reliable solutions. Hence, connect with the experts now, and acquire instantaneous help for Asus Laptop associated technical difficulties.