When this error code appears, then you can see a message “Your PC needs to be repaired. An unexpected error has occurred. Error code: 0x0000034”. Generally, error code 0xc0000034 can be caused by the corrupted bootloader files. That could happen because of power outages, disk writes errors, boot sector viruses. When the Asus error code 0xc0000034 appears, the user cannot operate the system until the PC is repaired. Fortunately, there are so many several ways to fix the error code 0xc0000034. So, you have to follow the method below:

How to Fix Asus Error Code 0xc0000034?

From our research, we have sorted out some fundamental methods by which you can easily fix the Asus error code 0xc0000034. Let’s check them out below:

Fix 0xc0000034 in Windows Vista

If you are a Vista user, then you have to follow this method as instructed below.

Method 1: Run chkdsk

If you run the chkdsk command then, you can fix the error code easily.

1. In this step, firstly, you have to reboot your computer with the Windows Vista installation disc and boot from the disc
2. After that, select the repair your computer option and click Command Prompt
3. Now, you have to type this command chkdsk c: /r  and press the Enter key.
4. Once you are done with the process, you should restart the computer and check the problem is resolved or not.

Method 2: Run Startup Repair

This method is quite similar to the previous one. To perform this task, you have to follow the same steps from Method 1 until you boot into the Windows Vista installation disc and after that, select the repair your computer option and then click Startup Repair to continue the process. In this way, you can fix the Asus error code 0xc0000034. Still, if you are getting the error code, then you have to follow the next method below.

Method 3: Restore

If Startup Repair didn’t work out to fix the error code 0xc0000034 then you can try to restore your Windows Vista. To do this, you have to follow the same steps from Method 2: Run chkdsk until you boot into the Windows Vista installation disc. Once done, select the Repair your computer option and then, in the system recovery options screen, click System Restore to complete the process.

Fix 0xc0000034 in Windows 7

If you are a Windows 7 user then this section is only for you. Follow the method as instructed underneath:

Method 2: Run bootrec

Basically, you can run the bootrec utility to rebuild the BCD. To perform this task, boot from the Windows 7 DVD and click Repair your computer or press the R key. At the system recovery options screen, you have to select the Command Prompt.

When Command Prompt will open to you, type bootrec /rebuildbcd and press the Enter key.

Generally, Windows 7 systems have the System Recovery Options and then, you have to restart the computer and select Repair Your Computer to complete the process. Finally, you should check the error code is completely fixed or not.

Method 3: Startup Repair

If you are still getting the error code, then you can try to run the Startup Repair utility. Firstly, boot from the installation disc (CD or DVD) and then, select the Repair your computer or press the “R” key. After that, the System Recovery options should be available now and you have to select the Startup Repair option and finally, the problem will be resolved.

Fix 0xc0000034 in Windows 8

If you are a Windows 8 user, then you have to follow this section carefully.

Method 1: Run Automatic Repair

Mostly, Windows 8/8.1 comes with a built-in Automatic Repair tool that can easily fix several errors which prevent your PC to load and it is called Startup Repair on Windows 7 and Vista.

To run Automatic Repair, you have to follow the steps as instructed below:

• At first, you need to Insert the Windows 8 or Windows 8.1 DVD/USB and reboot your system
• After booting, click Repair your computer at the Install now screen

Now, you have to select the Troubleshoot option and then choose the Automatic Repair option

Once you are done with the process, follow the wizard instructions to finish the process

Method 2: Run bootrec

If Automatic Repair didn’t resolve the problem then you have to try this method.

1. To do this, you need to restart your computer and boot from the DVD/USB
2. After that, click Repair your computer and then select Troubleshoot. Once done, you have to open the Command Prompt.
3. Now, type the following commands in the Command Prompt. These are,

bootrec /FixMbr

bootrec /FixBoot

bootrec /ScanOs

bootrec /RebuildBcd

Once the last “bootrec” is finished, you should type exit and then, press the Enter key. Finally, you have to restart your computer and check the problem is resolved or not.

Method 3: Refresh

If the error code still arises, then you have to refresh your PC to fix the error code. To perform this task, you have to follow these steps carefully.

1. Firstly, you need to restart your computer and then press the F8 key or the F11 key on your keyboard.
2. After that, click Troubleshoot and then you have to select the Refresh your PC option

Finally, follow the on-screen instructions to finish the process. After refreshing, you need to check the problem is completely resolved or not.

Fix 0xc0000034 in Windows 10

In this section, we are going to explain how to fix Asus error code 0xc0000034 Windows 10. So, if you are a Windows 10 user then follow this section very carefully.

Method 1: Run Automatic Repair

Windows 10 comes with built-in with the Automatic Repair. You can easily solve the error code by using this tool. So, to run Automatic Repair, you have to follow these steps:

1. At first, insert the Windows 10 DVD/USB and reboot your system like previous.
2. Once done, you have to select the Repair your computer option at the Install now screen
3. After that, select the Troubleshoot option and click Automatic Repair.

Once you are done with the process, you need to follow the wizard instructions to complete the process. If you are still getting the problem, then you need to follow the next method.

Method 2: Run bootrec

If the previous method didn’t work out then you can run bootrec to fix the 0xc0000034 error. To perform this method you need to follow the steps below:

1. At first, restart your computer and boot from the DVD/USB
2. After that, click Repair your computer and then you have to select the Troubleshoot option.
3. Now, open the Command Prompt and type the following commands in Command Prompt.

bootrec /FixMbr

bootrec /FixBoot

bootrec /ScanOs

bootrec /RebuildBcd

Once done, you should type exit and press the Enter key. After doing all the above steps, you need to restart your computer and check the problem is resolved or not.

Method 3: Refresh

If the error code still appears then you can try to refresh your Windows 10 to fix the problem. To perform this task you have to follow these steps.

1. At first, you need to restart your computer and then press the F8 key or the F11 key on your keyboard.
2. Now, click Troubleshoot and then you have to select the Refresh your PC option.

Once you are done with the process, follow the instructions to complete the process. In this way, you can resolve the error code 0xc0000034.

General Solutions

Now, we are going to discuss some general solutions to fix the Error code 0xc0000034. You should follow the steps as instructed below.

Method 1: Run Windows Automatic Repair

This is the first step that we are going to discuss. Generally, Windows offers an Automatic Repair tool which uses the Windows installation media such as DVD, CD or USB drive to resolve the error code 0xc0000034 in a few steps.

1. In this step, at first, you have to insert the Windows 10 DVD or USB stick and then restart your system.
2. After that, you have to make sure to boot your computer using the Windows installation media instead of your hard drive. To do this, you have to press the F8 or F11 key depending upon your system and then select the correct boot device option.
3. Once done, go to the startup menu and then select Next. Now, you have to select the Repair your computer option.
4. On the next screen, select the Troubleshoot option and then click on Automatic Repair.

After that, you can see a list of Operating Systems where you have to select the one. Once done, the repairing process starts checking your Windows and detect the error code. Now, you have to wait until the end of the entire process. After repairing the problem must be resolved.

Method 2: Restore your computer

In this step, you have to restart your computer first and press the F8 key for booting into the Advanced Boot Options:

1. After that, select the Repair your computer option and press the Enter key.
2. Now, you have to choose a language, keyboard and click Next
3. Once done, enter the Administrator password and click OK.
4. At the System Recovery Options screen, you have to select System Restore and click Next
5. Now, browse the available restore points and then select the restore point and click Next

After doing all the above steps, you have to select the Finish at the Confirm your restore point screen and click Yes. Finally, click Restart to restart the computer and check the problem is resolved or not.

Method 3: Run a VBS script

This is the last method that we are going to discuss now. To perform this task, you have to save the following text as Script.vbs on a USB flash drive. These are,

Dim xmlDoc, node, nodeList, fileName, backupFileName, numberOfPOQNodes

Set xmlDoc = CreateObject(“Microsoft.XMLDOM”)

If Wscript.Arguments.Count = 0 Then

WScript.echo(“Error! No XML file specified.”)

Wscript.quit

End If

fileName = WScript.Arguments(0)

backupFileName = Left(fileName, InStrRev(fileName, “.”) – 1) & “_backup.xml”

If Not xmlDoc.load(fileName) Then

WScript.echo(“Failure loading XML file ” & fileName & “.”)

Wscript.quit

End If

xmlDoc.save(backupFileName)

Set nodeList = xmlDoc.documentElement.selectNodes(“POQ”)

numberOfPOQNodes = nodeList.Length

For Each node in nodeList

xmlDoc.documentElement.removeChild(node)

Next

xmlDoc.save(fileName)

Set xmlDoc = Nothing

WScript.echo(numberOfPOQNodes & ” POQ nodes removed. Script completed.”)

1. After that, you have to restart the computer and press the F8 key on your keyboard.
2. Once done, boot into the Advanced Boot Options menu and then select the Repair your computer option and then you have to press the Enter key.
3. Now, select a language and keyboard and enter the Administrator password, if it is prompted.
4. After that, you have to insert the USB flash drive with the Script.vs file.
5. Now, select the Command Prompt at the System Recovery Options screen and then you have to navigate to the USB flash drive by typing the letter of the drive F:
6. Then type this command Cscript Script.vbs C:\Windows\winsxs\pending.xml and press the Enter key.

Once done, you can see a confirmation message that is 2 POQ nodes removed. Script Completed and type exit. Now, you have to press the Enter key and restart your computer to complete the process.

So, these are the most effective ways to fix Asus error code 0xc0000034. Hope, you can easily understand. Still, if you are getting any problem then you suggest you opt for expert help for better assistance.