- Posted by Eve Vincent
- On April 20, 2019
Asus Maximus VIII Hero is one of the most popular gaming laptops. But in reality, it is not free from the occasional glitches. Asus Maximus VIII Hero error code 99, is one of those common errors which you can encounter with this gaming laptop. When this typical error occurs, then you see a “No signal” message on your device. If you are facing this issue and want to resolve it, then you are in the perfect place. This article contains more than one hacks which will help you out. But before going on that part, at first, let’s focus on the causes due to which you are getting this error. After that, you will be walked through the solutions part.
Causes for Asus Maximus VIII Hero Error Code 99
There are more than one causes due to which you are getting this error on your device. For instances –
- This is a black screen error which you can encounter if your device is not connected with the power outlet properly.
- Besides that, you can also encounter this error due to some glitch present in the hardware.
After knowing the causes, now, let’s focus on the solutions to troubleshoot this error on a quick note.
How to Resolve Asus Maximus VIII Hero Error Code 99
Here are some expert provided solutions using which you will be able to troubleshoot this particular error. Therefore, try to follow the steps carefully without missing out on any.
Method 1: Disconnect the HDD
When you encounter this error with your device, then just disconnect the damaged or problematic HDD. It is because removing the HDD as well as connecting it with another device might be beneficial for you. In that case, you will be able to access files and folder to check the status of the error. You can also get this error due to SATA cable.
Method 2: Remount the CPU
If you are not able to troubleshoot this error using the first method, then try to mount the motherboard from its position. Once done, try to remount the motherboard to the exact location. After that, turn on your device and check whether you become able to resolve this particular error or not. If it still persists, then move to the next step.
Method 3: MBR Restoring
Using damaged MBR can also cause this error. In that case, go to the BIOS boot section and save the changes. In some cases, you can also restore the MBR, using the steps mentioned below.
- At first, boot into the OS with the help of the original installation DVD or use the recovery USB.
- You will be able to navigate to the Welcome screen. Tap on the option named Repair your Computer.
- Select the option Troubleshoot.
- Navigate to the Command Prompt.
- Once the Command Prompt loads perfectly, enter the following commands:
bootrec /FixMbr bootrec /FixBoot bootrec /ScanOs bootrec /RebuildBcd.
- Hit Enter to continue.
Once done, try to check the status of the error. If it persists, then try to follow the next method mentioned below.
Method 4: Reset CMOS
If you are still not able to resolve this particular error with your device, then unplug the power supply as well as motherboard battery. It will reset the CMOS. After resting try to set it into its original position. Now, turn on your computer again.
This time, you will be able to resolve this error on your own.
Here are some expert provided solutions using which, you will be able to troubleshoot this particular error with your device. Hopefully, these hacks and tricks will help you out. If you encounter any kind of glitches while doing the troubleshooting methods, then you can leave a comment in the below section. Share your thoughts with us